How to Insert TF Card
To Ensure Product Warranty
E36 User Manual
Confirm the package contains an authentic, new device from
Aiworth.
The original package comes film wrapped and has bar code
information.
Package List
1 x E36 Device
1 x Earphone
1 x LINE IN Cable
1 x External Microphone
1 x USB Cable (for data transfer and charging)
1 x VIP Card
Product Warranty
1 year warranty unless registered with VIP.
1. Check the TF card direction, correct
direction like picture shows
V2
2
Learn how to operate the buttons in the product sketch.
Product Sketch
NO.
Function
Built-in Mic:
Captures the voice and records. Do not click
Battery Bar (when battery bar is empty,
1
on buttons when device is recording.
battery needs recharging)
Earphone:
You may plug in earphones to hear the
2
Length of Recording in minutes/seconds
Built-in Mic
playback.
3
Recording format & bit rate
LINE-IN:
Connect for LINE IN cable / external microphone
Remaining Recording Time (remaining
4
capacity)
USB:
For charging or to download recordings to a
Screen
computer.
5
Recording Status
PLAY/PAUSE:
Play recordings or turn on/off the device
Line in jack
Headphone
6
L / R Channel meter
jack
REC:
Button for recording.
Vol+ / Up
7
Total Recording File Count
Stop/
Save recording, stop playback.
USB port
Record
STOP:
Return/Save
Play / Pause
M:
Menu options. Use up/down to select, use PLAY to
/ ON/OFF
Fast
Quick Start Guide
Rewind /
Forward
Lock
confirm. Press Stop to return to main menu
Previous
/ Next
Button
VOL-/Down
UP/DOWN (+/-):
Selects Menu Options. Adjust speaker
Reset
Press PLAY button for two seconds to turn
Turn ON device:
volume when playback.
on the device.
Menu
Speaker:
Device has a built-in speaker. You can hear the
TF card
Recording:
press REC button to begin recording.
Speaker
socket
playback without earphones.
Delete
Save Recording:
/A-B
REW/FF :
Selects left/right, hold it for rewind / fast forward
Delete Recording:
when playback
select Delete One. This deletes a single recording. To
RESET:
when device in error status, push RESET button quick
delete all files,Use +/- button to choose Delete All -> Select
to fix it
Lanyard
hole
Yes -> Use PLAY button to confirm your choice.
QUICK Delete:
by pressing PLAY button turn on the device,
press REW/FF button to select a recording, and then press
6
7
正 面
展 开 尺 寸:525* 300m m ,折 叠 尺 寸 ： １ ０ ５m m* 15 0m m
双 面 两 色 印 刷
2. insert the TF card softly, push it in,
the
3. Push the TF card, the card will jump out
card will locked in the device
5
3
4
Contact customer service with Order ID or System
the DEL button at device's right side, quickly delete the
●
selected recording, or delete All recordings.
Firmware Version Information, or Bar Code on the package
Play a Recording: by pressing PLAY button turn on the
for a more effective reply.
device, press REW/FF button to choose the recording you
Register for VIP service within 30 days to receive
●
wish to hear -> press PLAY.
effective customer service and extend your recorder's
Play Next / Previous Recording: press the REW/FF button.
warranty to 18months.
Fast Forward / Rewind: press and hold the REW/FF button.
DON'Ts
Do not scratch the recorder body.
Important Notice for Using This Device
●
If typing or writing near the device while record function is
●
DOs
on, it will capture the noise.
Listen to a test file on the device to check sound levels.
Do not format the device unless the files have been backed
●
●
●
Backup data as frequently as possible.
up.
Charge the device via its USB cable to a computer or wall
Do not delete a file unless the file has been backed up.
●
●
charger (charger input less than 5V 1A).
Do not press any buttons when device is connected to a
●
When battery is low (battery bar empty), save recordings
computer.
●
and recharge immediately.
Do not use non-original micro USB cable to transfer data
●
press STOP button to save recording
The device supports charging and recording at the same
from device to computer. Not all micro USB cables support
●
press Menu button. Select -> Delete ->
time.
data transfer.
Remember to hit STOP and save your recording each time.
Do not use the Voice Activated Function unless needed. It
●
●
Device won't make any noise during recording. It will flash
may not record some low decibel voice you want recorded.
●
the Record LED light (this function can be turned off).
Do not pause the device for a long time, as the device will
●
Keep this booklet for future reference.
automatically shut down when there is no operation such as
●
For any issues, problems, or questions, contact us
playing or recording.
●
support@aiworthtec.com
8
9
10
3) Turn on the recorder
5) Pause / Resume Recording
Operational Explanations:
Press PLAY button to turn
During recording, hit PLAY button
These instructions will say "hit" or "press and hold."
ON/OFF the recording
to pause recording.
Hit: a short press of the button.
Hit PLAY button again to resume
device.
Press and hold: press the button a few seconds until the
recording.
6) Play Recording
screen shows the information.
Once you have saved a recording,
Basic Operation Guide
hit PLAY button and play back what
was just recorded.
1)Charging the device
Use the USB cable provided. Connect to a computer, USB
socket, or USB Adapter. The battery can be fully charged in 3
7) Adjust Speaker Volume
(3)
hours, single full charge can work up to 70 hours.
During playback, use + / - to adjust
2) Download file to computer
speaker volume.
RECORD
4) Recording
8) Fast Forward / Rewind
Hit REC button to begin recording.
During playback, press and hold FF
Press STOP to automatically save
to use fast forward.
recording.
During playback, press and hold
Use the USB cable provided to connect to your computer.
REW to rewind.
Find the file (E36) on your computer. Drag & Drop or Copy
and Paste the recordings from the recorder file to your
computer and share with friends.
11
12
(4)
at low decibels. Use regular on/record/stop for meetings.
Use +/- to adjust playback speed from -8 to +8; the normal
move to next.
2.5 Record LED
Note
speed is 0, remember to press PLAY confirm settings
ON: default. LED indicator light is ON. OFF: turn off the LED
5.System Settings
1.If forgot password, please enter 18 18 18, and then hold
indicator light.
Press Play (turn on device) -> hit M -> use +/- to System Set -
STOP button more than 3 seconds to reset the device
2.6 Noise Cancellation
> hit PLAY
2.If password function is ON, when connect to computer, we
OFF: default. When it is ON, it could help to reduce noise
Language:
English default. We could select for other
need to input correct password, otherwise, it will fail connect
interference.
to computer
language of the device. If, unfortunately, the device is set to
Note: when noise cancellation is ON, it will record at mono
the wrong language, please contact customer service.
Player Information:
2.7 Record Monitor
support@aiworthtec.com
Device shows the firmware version and the release date.
OFF: default. When it is ON, use earphones to hear what it is
Date and time:
Disk space:
recording.
Time settings:
Device shows the free space and total space.
3.Play Settings
Set time format: we can set at 12/24
Format Device:
Press Play (turn on device)-> tap M -> use +/- to Play Setting
This will format the disk and erase all data on the device,
Set Time: press +/- to adjust hour, minute. Press REW/FF to
-> hit PLAY
move to next
so remember to back up important files before doing.
Use +/- to select Repeat.
Press PLAY to confirm and finish setting
Select Yes, press PLAY confirm. Device will start to reformat
Repeat one: repeats single file again and again.
Date Settings:
and erase all data. Wait until the device reboots and
Repeat all: repeats all files in directory from A-Z again and
Set date format: we can set at 3 different date display style
completes the process.
again.
Set date: Press +/- to adjust year, month, or day. Press
Note:
Do not turn off power when formatting device. If,
Shuffle: plays back files in random order. To stop shuffle,
unfortunately, the devise is mistakenly cut off, it will show as
REW/FF to move to next.
select at repeat one or repeat all
disk error.
Press M to confirm and save setting.
4.Variable Playback Speed
Password Set:
To correct disk error.
Press Play (turn on device) -> hit M -> use +/- to Variable
Password switch: OFF default. When turn it on, we need to
Push down the power button from ON to OFF position.
Playback Speed -> hit PLAY
set password for the device Password set: input a 6 digits
Connect the device to a Windows computer, and format the
password. Press +/- to set the numbers. Press REW/FF to
disk from the computer to return to normal state.
17
18
9) Previous / Next
Delete
Tap REW or FF to select, move to
Delete one
2017-0302
previous / next recording file (or
17-04-24-06-33-55.
Delete All
17-04-24-06-33-55.
music track).
10) Play Music (use as MP3 Player)
(11)
Attach device to computer. Transfer
NOTE: When turning on the device, we can press REW / FF
music file from computer to recorder.
button to select file to Delete, in default, it reads the latest
Detach device from computer and
file, so if we will directly go to delete option, it will delete the
turn on.
latest file.
Press down MENU button and switch
(9-10)
to music folder.
Menu Options
(5-6)
Note: the songs do not put inside the
The PLAY button works as OK/Confirm in menu options
RECORD folder, you could create a
1.Save Position
new folder for it.
Press Play (turn on device)-> tap M -> Save Position -> Hit
17-04-24-06-33-55.
17-04-24-06-33-55.
PLAY Use +/- to select save position, TF (need insert TF
11) Delete Recording
card), Flash (built-in storage)
Turn on the device by pressing Play.
Note: press PLAY to confirm selection, if we didn't insert TF
Press REW/FF to select a file to
card correctly, when selected at TF, it will show "removed TF
delete -> press DEL button, directly
card"
enter delete option
2.Record Settings
Press Play (turn on device) -> hit M -> use +/- to Record
Settings -> hit PLAY
(8)
14
(11)
15
13
Note:
If you are using a MAC computer, please contact our
Recording Parameter
customer support. Reformatting on a MAC computer needs
different options.
Product
Factory Setting:
3.82 X 1.26 X 0.51 inch (95X31X12MM)
Dimension
Restores to factory default. Very helpful if confusion arises
when creating settings.
Screen Size
128 x 64 LCD
Select Yes, press PLAY to confirm. Device will start to restore
USB 2.0 High Speed (Charging and
USB Socket
Data Transfer)
factory settings.
Recording Parameter
Input < 1A 5V
Charging
1536kpbs, 512kpbs, 256kpbs, 128kpbs,
Recording
8GB
16GB
32GB
Record Bit Rate
Quality
64kpbs, 32kpbs
Windows98 and later version, XP,
1536kpbs
12 hours
24 hours
48 hours
Support System
Windows 7 /8 /10
WAV
512kpbs
36 hours
72 hours
144 hours
Max 10mW+ (30Ohm), Freq 20Hz - 20KHz,
Earphone Output
S/N ratio > 90db, Distortion factor 0.05%
256kpbs
72 hours
144 hours
288 hours
Memory
8G / 16G / 32G (Subject to the device)
128kpbs
145 hours
290 hours
580 hours
Battery
3.7V 800mAH Lion Polymer
Mp3
64kpbs
290 hours
580 hours
Music Playback
1160 hours
12 hours (single full charged with
Battery Time
earbud, screensaver)
32kpbs
580 hours
1160 hours
2320 hours
Max Recording
Full charged, recording at 32kpbs could
Battery Time
work 47 hours
Note:
This form shows the maximum recording file time that
Support Music
MP3 / WAV / FLAC / APE / OGG / WMA
can be stored in the device, not the battery time, Device
Format
capacity is subject to the entity.
20
19
21
反 面
2
.1Recordings library
Shows all files recorded on device.
.2Record Format
2
yes
We could choose to record at WAV or MP3 format
No
2
.3Set rec bit rate
Below the bit rate chat
Format
Bit Rate
WAV
256kpbs
512kpbs
1536kpbs
MP3
32kpbs
64kpbs
128kpbs
2.4AVR Mode
AVR Switch: turn on / off Activated Voice Record Mode
AVR Level: select the voice activated recorder sensitivity
level
At AVR mode, we still need to press STOP to save
recordings when we complete a recording task.
Voice Activated Sensitive Level
From Level 1 to Level 5: Level 1 only picks up voice or sound
above 70db, a very loud sound. Level 5 is very sensitive, so
any quiet sound will be recorded. (i.e. normal
environmental noise will activate recording).
Note:
do not turn on this function for important lectures or
meetings. It may skip or lose some very important sentences
16
Frequently Asked Question
1) Device Frozen
When device was frozen, we can push the RESET button to
reset the device, it will not delete files on device
2) Restore to Factory Setting
Restore to factory setting, very helpful if confusions arises when
creating settings
3) Format Device
Format device, it will delete all data on the device. Device also
can format on Windows computer or MAC computer. If format on
MAC computer, Contact customer service support-us@evis-
tr.com to get tutorials
4) Forgot Password
If forgot password, enter 18 18 18 and hold the STOP button 3
seconds.
5) Failed connect to computer
Need using the original USB cable. If failed connecting to
computer, we could try below solutions or contact customer
service support-us@evistr.com
A. If set password, need enter correct password when connect-
ing to computer
B. If cable damaged, try with android phone cable
C. Computer socket loose, try with another socket
D. Computer didn't connect to internet, for some computer, they
need use internet to recognize the device, so just reboot
computer and connect device again
E. Don't press buttons when connecting to computer, in case of
entering charging only mode
F. Don't interrupt connection unexpectedly, in case of file lost or
damaged
22
